"Full Gasket Set Head Bolts Fit 05-06 Chrysler 300 Dodge Magnum 3.5 SOHC VIN G. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head. The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder headr. Head gasket set is combined with a conversion gasket set / lower gasket set to form a full gasket set for the entire engine.. Time will come that your head gasket will leak or blow. The cylinder head bolts hold the cylinder head and cylinder head gasket in place and ensure that the cylinder head will continue to hold up despite the tremendous amounts of pressure in the combustion chamber. Therefore the cylinder head bolts, and cylinder head gasket are an important part of your engine. They should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. Be sure to have your engine gaskets, and head bolts replace with aftermarket replacement head gasket bolts set as soon as it starts to give you trouble.
Fits Following Models:
2005-2006 CHRYSLER 300 3.5L 3497CC 215CID V6 SOHC, (24 VALVE), VIN CODE ""G""
2005-2006 DODGE MAGNUM 3.5L 3497CC 215CID V6 SOHC, (24 VALVE), VIN CODE ""G, V""
This item includes:
Multiple Layers Steel (MLS) Head Gasket
Valve Cover Gasket
Valve Stem Seals
Intake Manifold Gasket
Exhaust Manifold Gasket
Front Camshaft Seal
O-rings
Front Crankshaft Seal
Rear Main Seal (One-piece rear main retainer w/Seal not included)
Water Pump Gasket
Other Small Gaskets
RTV Silicone
16 Cylinder Head Bolts (8 Long Bolts, 8 Short Bolts)"