Material:Aluminum ,T-304 light weight stainless steel.
The diameter of this bar is approx. 38mm, it's STRONG, and was a breeze to install.
Unlike the old design and most other traction bars on the market, it comes with its own 1 piece Radius rods and 1 adjustable heims, and able to adjust caster where it bolts up to the lca.
Increase traction to ground.
Prevent spring windup during breaking.
Easy to fit, direct bolt on.
Professional Installation is Highly Recommended
Installation Instruction is not Included.
Remove the old crossmember
Remove both front tow hooks.
Mount the Traction bar without the radius arms.
Install radius arms. Bolt the front first where it goes on the bar
loosen up the nut on the heims and adjust length until the holes line up to the top of the front lower control arm(be sure to count the threads on the heims to make sure both side is equal length)
Tighten up all bolts and make sure to not forget the nut on the heims.
1 x Traction Control Tie Bar Kit
Just as shown in picture
1988-1991 Honda Civic models only
1988-1991 Honda CRX models only
For Year and Model, Please Check Compatibilit