Pistons Main Rod Bearings Fit 01-08 Acura Honda J35A3 J35A4 J35A5 J35A7 J35A9. A piston is a cylindrical piece of metal that moves up and down inside each cylinder, compressing the air-fuel mixture and capturing the force created by the combustion process. This force is then transferred to the crankshaft, via the connecting rod. Symptoms of a Bad or Failing Piston include engine misfire, excessive oil consumption, knocking or slapping noise from inside engine. The crankshaft, connecting rods and bearings are extremely important in every engine build, because they convert the reciprocating motion of the pistons into rotational torque. The longer the stroke, the greater the leverage effect and the greater the torque output of the engine. Time will come that your engine pistons, rings and bearings will wear out. Always remember, when your engine bearings fail, a replacement should immediately be installed. Be sure to have your engine pistons, rings, crankshaft bearings, and connecting rod bearings replace with our aftermarket replacement parts as soon as it starts to give you trouble.
Fits Following Models:
2001-2002 ACURA MDX 3.5L 3471CC V6 SOHC, (24 VALVE), ENG CODE "J35A3"
2003-2006 ACURA MDX 3.5L 3471CC V6 SOHC, (24 VALVE), ENG CODE "J35A5"
2005-2007 HONDA ODYSSEY 3.5L 3471CC V6 SOHC, (24 VALVE), ENG CODE "J35A6"
2005-2007 HONDA ODYSSEY 3.5L 3471CC V6 SOHC, (24 VALVE), ENG CODE "J35A7"
2003-2004 HONDA ODYSSEY 3.5L 3474CC V6 SOHC, (24 VALVE), ENG CODE "J35A4"
2005 HONDA PILOT 3.5L 3471CC V6 SOHC, (24 VALVE), ENG CODE "J35A6"
2006-2008 HONDA PILOT 3.5L 3471CC V6 SOHC, (24 VALVE), ENG CODE "J35A9, J35Z1"
2003-2004 HONDA PILOT 3.5L 3475CC V6 SOHC, (24 VALVE), ENG CODE "J35A4"
2006-2008 HONDA RIDGELINE 3.5L 3471CC V6 SOHC, (24 VALVE), ENG CODE "J35A9"
2006-2007 SATURN VUE 3.5L 3471CC V6 SOHC, (24 VALVE), VIN CODE "4"
2004-2005 SATURN VUE 3.5L 3474CC V6 SOHC, (24 VALVE), VIN CODE "4"
2004 SATURN VUE 3.5L 3475CC V6 SOHC, (24 VALVE), VIN CODE "4"
This item includes:
6 Pistons with Complete Ring Set (Sizes available: STD - Standard Size)
Standard Bore Diameter: 89.00mm
1st Group: 1.20mm
2nd Group: 1.20mm
Oil Ring: 2.80mm
6 Piston Wrist Pins
12 Cir Clips
Main Bearing Set (STD - Standard Size, or Undersize 0.25mm = 0.010", 0.50mm = 0.020")
Rod Bearing Set (STD - Standard Size, or Undersize 0.25mm = 0.010", 0.50mm = 0.020")
Thrust Washer