Non-MDS Kit for 2009-2016 Dodge Ram 2500 3500 5.7L Hemi Engines

Non-MDS Kit for 2009-2016 Dodge Ram 2500 3500 5.7L Hemi Engines. Allow the
engine to reach its maximum RPM potential. Decrease friction and increase
longevity when directly compared to flat tappet lifter. Perfect performance
replacements for stock hydraulic roller lifters or retro-fit hydraulic roller
lifters for non-roller blocks.

Non-MDS Kit for 2009-2016 Dodge Ram 2500 3500 5.7L Hemi Engines. The hydraulic
lifter in a car's engine uses oil pressure to adjust a plunger and take up all
the clearance in the valve train. This helps to ensure less engine noise and
longer reliability, due to less wear and tear. Hydraulic lifters can begin to
fail through normal use of a vehicle. After several years of running the
engine of your vehicle, the hydraulic lifters within the valves can become
laden with sludge, and other contaminants in the valve, that they start to
wear out. New hydraulic lifters can make a tremendous difference in the way
that a vehicle runs as well as how the engine sounds. The head gasket is the
key component of the engine. It is compressed between the engine block and the
cylinder head. The head gasket seals in the internal combustion process to
make sure maximum compression is achieved and also keeps coolant and oil from
mixing together as the two fluids travel from the engine block to the cylinder
head. Therefore the cylinder head gasket, and lifters are an important part of
your engine. They should always be in perfect condition and should be
maintained properly. So, if you notice that this part is showing signs of
excessive wear, have them replaced immediately. Be sure to have your worn out
parts replace with our aftermarket replacement parts set as soon as they start
to give you trouble.

Fits Following Models:
2009-2010 DODGE RAM 2500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2009 DODGE RAM 3500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2012-2016 RAM 2500 5.7L 345CID V8 BI-FUEL OHV, (16 VALVE) VIN CODE "T"
2011-2016 RAM 2500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2011-2016 RAM 3500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"

This item includes:

2 Multiple Layers Steel (MLS) Head Gasket (Left & Right)
Front Timing Cover Gasket
RTV Silicone
16 NON-MDS Hydraulic Roller Lifters
4 NON-MDS Yoke Assembly w/ Bolts
Mopar Genuine Non-MDS Expansion Plug (Solenoid Block Off Plugs)
Mopar Genuine Non-MDS Camshaft

Camshaft Specs:
Type: Stock
Exhaust Duration: 290
Exhaust Lift: .460"
Intake Duration: 290
Intake Lift: .472"