MLS Head Gasket Set Timing Belt Kit AISIN Water Pump Fit 00-03 Subaru EJ251/252. Located in the engine compartment behind the drive belts, the timing belt keeps the crankshaft in sync with the camshaft(s), essentially ensuring the proper timing and operation of the engine and its valves. When replacing a timing belt, also replace tensioner, and pulleys. Failure of pulleys and tensioners, after replacing only the belt, can cause valve or piston damage and lead to more expensive repairs. Additionally, timing belt driven water pumps should also be replaced at the same time as the timing belt. Operated by the drive belt, the water pump's core function is to allow coolant to flow into the engine continually. Together, these three components: timing belt, tensioners and pulleys, and the water pump are essential to the overall health of your engine. Ignoring the replacement of a timing belt as a part of scheduled maintenance could result in major engine failure down the road. Be sure to use our aftermarket replacement timing belt kit when the timing belt is serviced for the best performance.
Fits Following Models:
2003 SUBARU BAJA 2.5L 2458CC H4 SOHC, (16 VALVE), ENG CODE "EJ251"
2001-2003 SUBARU LEGACY 2.5L 2458CC H4 SOHC, (16 VALVE), ENG CODE "EJ251"
2000 SUBARU LEGACY 2.5L 2458CC H4 SOHC, (16 VALVE), ENG CODE "EJ251, EJ252"
2000-2003 SUBARU OUTBACK W/ VIN "B" 2.5L 2458CC H4 SOHC, (16 VALVE), ENG CODE "EJ251, EJ252" - (WILL NOT FIT OUTBACK WITH VIN G.)
This item includes:
Multi-layered Steel (MLS) Head Gasket
Valve Cover Gasket
Valve Stem Seals
Intake Manifold Gasket
Exhaust Manifold Gasket
Front Camshaft Seal
O-rings
Other Small Gaskets
RTV Silicone
1 Timing Belt (223 teeth)
1 GMB Tensioner (bearing & hydraulic cylindrical integral)
2 GMB Upper Idlers (bearing)
1 GMB Lower Idler (sprocket with bearing)
4 Camshaft Seals (32 x 45 x 8)
1 Front Crankshaft Seal (33 x 49 x 8)
AISIN Water Pump w/ Gasket (AISIN - OE Supplier for TOYOTA / LEXUS)
GMB is one of largest global manufacturers of OE and Aftermarket automotive products. Since 1943, GMB’s manufacturing quality has been recognized within the industry beginning with Tensioner and Idler Bearings, Water Pump, Universal Joints. Over the years GMB manufacturing quality expanded into a variety of quality parts now including Wheel Bearings and Hub Assemblies, Fuel Pumps, Fan Clutches, and Steering & Suspension parts. Each product line has extensive Asian, Domestic, and European coverage that meet or exceed OE standards. GMB has decades of manufacturing and engineering experience within these categories, and serving OE car makers including Hyundai, Kia, GM, and Chrysler. All GMB products are manufactured in GMB’s factories in Japan, Korea, Thailand, and China utilizing strict OEM specifications. Genuine GMB parts ensure product quality and safety. GMB offers extensive coverage fulfilling the needs of every customer.
AISIN (AISIN U.S.A. MFG., INC) located in East Side Industrial Park in Seymour, IN, near Interstate 65, AISIN. AISIN is focused on creating automotive components and systems for the OE car makers such as Lexus, Toyota, and aftermarket automotive industry. AISIN products meet and exceed their highest quality standards. AISIN is committed to growth and success, but never at the expense of quality, and never without the respect and support of our team members. AISIN pursue advanced technology and improved quality, envisioning the future for people, automobiles, and the world. Through the creation of one-of-a-kind products, AISIN is pioneers in new value, delivering innovations that are ahead of their times, one after another. Since our very beginning, Aisin Seiki has been built on a long-standing dedication to "quality first." It's a principle that defines the organization, from product development and assurance through customer satisfaction, the environment and our sense of social responsibility and contribution.