MLS Head Gasket Set Intake Exhaust Valves Fit 94-97 Acura Honda 2.2L F22B1 SOHC

MLS Head Gasket Set Intake Exhaust Valves Fit 94-97 Acura Honda 2.2L F22B1
SOHC. The best performance longest lasting valves available to the
aftermarket. A one-piece, forged construction offers high strength and fatigue
properties. Micropolished to allow for less oil retention on the stem which
creates less drag for a smoother motion. Replace Part : HS9958PT2, V4349,
V4561

MLS Head Gasket Set Intake Exhaust Valves Fit 94-97 Acura Honda 2.2L F22B1
SOHC. The main function of an engine valve is to open and close rapidly. This
allows the air and fuel charge to enter the combustion chamber and after
ignition, the exhaust valve allows the waste gases to flow out into the
exhaust system. Each cylinder has at least one intake and one exhaust valve.
The head gasket is the key component of the engine. It is compressed between
the engine block and the cylinder head. The head gasket seals in the internal
combustion process to make sure maximum compression is achieved and also keeps
coolant and oil from mixing together as the two fluids travel from the engine
block to the cylinder head. The cylinder head bolts hold the cylinder head and
cylinder head gasket in place and ensure that the cylinder head will continue
to hold up despite the tremendous amounts of pressure in the combustion
chamber. Therefore the cylinder head bolts, cylinder head gasket, and intake
exhaust valves are an important part of your engine. They should always be in
perfect condition and should be maintained properly. So, if you notice that
this part is showing signs of excessive wear, have them replaced immediately.
Be sure to have your worn out parts replace with our aftermarket replacement
parts set as soon as they start to give you trouble.

Fits Following Models:
1994-1997 HONDA ACCORD EX V-TEC 2.2L 2156CC L4 SOHC, (16 VALVE), ENG CODE
"F22B1"
1997 ACURA CL 2.2L 2156CC L4 SOHC, (16 VALVE), ENG CODE "F22B1"

This item includes:

Multiple Layers Steel (MLS) Head Gasket
Valve Cover Gasket
Valve Stem Seals
Intake Manifold Gasket
Exhaust Manifold Gasket
Front Camshaft Seal
O-rings
Other Small Gaskets
RTV Silicone
10 Cylinder Head Bolts (1 Long Bolt, 9 Short Bolts)
8 High Performance Intake Valves (Head 1.37" x Stem 5.5.00mm x Length 4.56")
8 High Performance Exhaust Valves (Head 1.18" x Stem 5.5.00mm x Length 4.49")