|
Intake Manifold Repair Bracket For 03L129711E For VW Audi Skoda Seat 2.0TDI 🇺🇸
Tired of your check engine light?
Fix your Common Rail TDI Diesel P2015 fault code now and save over $800! For thousands of drivers of Volkswagen, Audi, Seat and Skoda cars the only alternative to our repair bracket is replacing the diesel intake manifold which costs $900 or more for parts and labor. Besides the cost, replacing the CR diesel intake manifold also requires removing fuel lines which is risky. You can install our bracket in 10 minutes and save yourself a ton of money and maybe even your delicate and even more expensive fuel system.
How it works:
Our repair bracket limits the range of motion of the V157 intake flap motor to the exact same range as when your car was new. This eliminates the possibility for the flap motor mechanism to open or close too far which is the cause of the P2015 error. Our bracket is also a great preventative fix. Installing a bracket now will prevent trouble later. With this bracket in place you won't experience the wear in the mechanism and the
terror
code that results. Our repair kit may also clear your P2004, P2006, and P2016 TDI error code
You will only need a T30 Torx screwdriver or socket to install this part.
Installation: There are many videos on YouTube detailing the quick an easy install process. The intake flap motor
must be temporarily removed to install the part correctly. We can only guarantee results if you remove the flapper motor to install this part. Sides of part must be flush with top plate. If the V157 flapper motor fails to move after the bracket is installed you can pull the motor arm forward into operating range with the engine running to "jump start" it. This should clear the code almost immediately or within 2-3 days of driving. You can also reset the CED with VCDS.
Here is the VW fault code this bracket prevents and fixes:
DTC 2968, 18447 or 008213 - Intake Manifold Flap Position Sensor (Bank 1) P2015 - 000 - Implausible Signal - MIL ON
Confirmed fitment for aluminum intake manifold 03L 129 711E on 2.0 liter four cylinder Common Rail TDI diesel engines. Not meant for V6 TDI or gasoline 2.0 turbo engines. The aluminum intake manifold was used on all North American diesel Golf, Jetta and Beetle TDI from 2009-2014 and on most 2,0 Common Rail TDI vehicles outside of North America. We also offer the repair bracket below for the all black plastic diesel manifold found only outside of the North American market (03L 129 711AG):
In USA and Canada: All 2009-2014 Golf, Jetta, Jetta Sportwagen, Beetle and Audi A3 with Common Rail TDI diesel engine. (The American made 2012-2016 NMS Passat doesn't have a flapper mechanism.)
Outside of USA or Canada (2008-2014 2.0 liter, 4 cylinder Common Rail TDI:
Volkswagen Golf, Eos, Beetle, Jetta, Passat, CC, Scirocco, Amarok, Touran, Transporter and Tiguan
Audi A3, A4, A4 Allroad, A5, A6, Q3, Q5 and TT
Seat Alhambra, Altea, Exeo, Leon, Ibiza, and Toledo
|
Product Disclaimer: This product is not designed to meet emissions/noise standards and is not for street or highway use. This product is not certified and may not be legal for use on emissions-controlled vehicles in any country/jurisdiction. Any other use, including recreational off-road, may violate local, state, and federal laws. Dynamic Performance Tuning does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the customer's responsibility. Dynamic Performance Tuning will not ship CARB restricted products into CARB restricted areas under any circumstances. ***OFF-ROAD USE ONLY***