Hydraulic Tensioner Fit 90-09 Toyota Lexus 4.0 4.3 4.7 1UZFE 2UZFE 3UZFE DOHC.
This timing belt tensioner adjuster / hydraulic tensioner maintains the
correct level of tension on your timing belt. Helps keep engine functioning
properly. Designed to fit properly every time. Replace OE Part : 13540-50030
Hydraulic Tensioner Fit 90-09 Toyota Lexus 4.0 4.3 4.7 1UZFE 2UZFE 3UZFE DOHC.
The timing belt tensioner is part of the internal combustion engine of the
car. The timing belt tensioner adjuster maintains the appropriate tension on
the timing belt. Worn out timing belt tensioners are the leading cause for
timing belt failures. Wear on the tensioner is difficult to detect. Some that
look OK may actually be near the end of their service life. It is most
economical and efficient to replace the tensioner when the timing belt is
replaced. It is critical to the life of the engine to keep the timing belt in
good condition and maintain the appropriate tension at all times. Be sure to
have your parts replaced with our aftermarket replacement timing components as
soon as it starts to give you trouble.
Fits Following Models:
1998-2000 LEXUS GS400 4.0L 3969CC DOHC V8, (32 VALVES), ENG CODE "1UZFE"
2001-2007 LEXUS GS430 4.3L 4293CC DOHC V8, (32 VALVES), ENG CODE "3UZFE"
2003-2009 LEXUS GX470 4.7L 4663CC DOHC V8, (32 VALVES), ENG CODE "2UZFE"
1990-2000 LEXUS LS400 4.0L 3969CC DOHC V8, (32 VALVES), ENG CODE "1UZFE"
2001-2006 LEXUS LS430 4.3L 4293CC DOHC V8, (32 VALVES), ENG CODE "3UZFE"
1998-2007 LEXUS LS470 4.7L 4663CC DOHC V8, (32 VALVES), ENG CODE "2UZFE"
1992-2000 LEXUS SC400 4.0L 3969CC DOHC V8, (32 VALVES), ENG CODE "1UZFE"
2002-2009 LEXUS SC430 4.3L 4293CC DOHC V8, (32 VALVES), ENG CODE "3UZFE"
2003-2009 TOYOTA 4RUNNER 4.7L 4663CC DOHC V8, (32 VALVES), ENG CODE
"2UZFE"
1998-2007 TOYOTA LAND CRUISER 4.7L 4663CC DOHC V8, (32 VALVES), ENG CODE
"2UZFE"
2001-2009 TOYOTA SEQUOIA 4.7L 4663CC DOHC V8, (32 VALVES), ENG CODE
"2UZFE"
2000-2009 TOYOTA TUNDRA 4.7L 4663CC DOHC V8, (32 VALVES), ENG CODE
"2UZFE"
This item includes:
1 Timing Belt Tensioner Adjuster / Hydraulic Tensioner
Remark: Please be advised that the hydraulic tensioner comes with the pulling
pin shown in the picture below. Once the pin is pulled off, the hydraulic
tensioner will be automatically locked and no longer can be used. Return will
NOT be accepted once the locking pin has been pulled off. Hence, when
installing the hydraulic tensioner, it is absolutely necessary that you
install it in place with the pulling pin still attached. ONLY when you are
certainly sure that everything fits, then you can pull off the pin. If you are
in doubt when trying to install the hydraulic tensioner, please ask for
professional help.
Customer Reviews
Be the first to post review