Head Gasket Set Valves Timing Belt Kit Fit 01-05 Honda Civic 1.7L SOHC D17A1

Head Gasket Set Valves Timing Belt Kit Fit 01-05 Honda Civic 1.7L SOHC D17A1.
The best performance longest lasting valves available to the aftermarket. A
one-piece, forged construction offers high strength and fatigue properties.
Micropolished to allow for less oil retention on the stem which creates less
drag for a smoother motion. Replace Part : HS26236PT, 032-2953,
14400-PMM-A02, 14520-PLC-335, 19200-PLM-A01

Head Gasket Set Valves Timing Belt Kit Fit 01-05 Honda Civic 1.7L SOHC D17A1.
The main function of an engine valve is to open and close rapidly. This allows
the air and fuel charge to enter the combustion chamber and after ignition,
the exhaust valve allows the waste gases to flow out into the exhaust system.
Each cylinder has at least one intake and one exhaust valve. The head gasket
is the key component of the engine. It is compressed between the engine block
and the cylinder head. The head gasket seals in the internal combustion
process to make sure maximum compression is achieved and also keeps coolant
and oil from mixing together as the two fluids travel from the engine block to
the cylinder head. The cylinder head bolts hold the cylinder head and cylinder
head gasket in place and ensure that the cylinder head will continue to hold
up despite the tremendous amounts of pressure in the combustion chamber.
Therefore the cylinder head bolts, cylinder head gasket, and intake exhaust
valves are an important part of your engine. They should always be in perfect
condition and should be maintained properly. So, if you notice that this part
is showing signs of excessive wear, have them replaced immediately. Be sure to
have your worn out parts replace with our aftermarket replacement parts set as
soon as they start to give you trouble.

Fits Following Models:
2001-2005 HONDA CIVIC LX 1.7L 1688CC SOHC L4, (16 VALVE), ENG CODE
"D17A1"
22001-2005 HONDA CIVIC DX 1.7L 1688CC SOHC L4, (16 VALVE), ENG CODE
"D17A1"

This item includes:

Graphite Head Gasket
Valve Cover Gasket
Valve Stem Seals
Intake Manifold Gasket
Exhaust Manifold Gasket
Front Camshaft Seal
O-rings
Other Small Gaskets
RTV Silicone
10 Cylinder Head Bolts
8 Intake Valves (Head 30.00mm x Stem 5.5.00mm x Length 118.7.00mm - W/ 1 Keeper Groove Type.)
8 Exhaust Valves (Head 26.00mm x Stem 5.5.00mm x Length 116.00mm - W/ 1 Keeper Groove Type.)
1 Timing Belt (104 teeth)
1 Tensioner Roller Bearing
1 Camshaft Seal
1 Front Crankshaft Seal
1 Water Pump with Seal