Head Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Dodge Jeep Ram 5.7.
The best performance longest lasting valves available to the aftermarket. A
one-piece, forged construction offers high strength and fatigue properties.
Micropolished to allow for less oil retention on the stem which creates less
drag for a smoother motion. Replace Part : HS26423PT, ES72200, 53022087AC,
53022088AD, IV1163, EV1163
Head Gasket Set Intake Exhaust Valves Fit 09-15 Chrysler Dodge Jeep Ram 5.7.
The main function of an engine valve is to open and close rapidly. This allows
the air and fuel charge to enter the combustion chamber and after ignition,
the exhaust valve allows the waste gases to flow out into the exhaust system.
Each cylinder has at least one intake and one exhaust valve. The head gasket
is the key component of the engine. It is compressed between the engine block
and the cylinder head. The head gasket seals in the internal combustion
process to make sure maximum compression is achieved and also keeps coolant
and oil from mixing together as the two fluids travel from the engine block to
the cylinder head. The cylinder head bolts hold the cylinder head and cylinder
head gasket in place and ensure that the cylinder head will continue to hold
up despite the tremendous amounts of pressure in the combustion chamber.
Therefore the cylinder head bolts, cylinder head gasket, and intake exhaust
valves are an important part of your engine. They should always be in perfect
condition and should be maintained properly. So, if you notice that this part
is showing signs of excessive wear, have them replaced immediately. Be sure to
have your worn out parts replace with our aftermarket replacement parts set as
soon as they start to give you trouble.
Fits Following Models:
2011-2015 CHRYSLER 300 5.7L 345CID V8 FLEX OHV, (16 VALVE) VIN CODE "T"
2009-2015 CHRYSLER 300 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2009 CHRYSLER ASPEN 5.7L 345CID V8 ELECTRIC/GAS OHV, (16 VALVE) VIN CODE
"T"
2009 CHRYSLER ASPEN 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2009-2016 DODGE CHALLENGER 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2011-2016 DODGE CHARGER 5.7L 345CID V8 FLEX OHV, (16 VALVE) VIN CODE "H"
2009-2016 DODGE CHARGER 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2009 DODGE DURANGO 5.7L 345CID V8 ELECTRIC/GAS OHV, (16 VALVE) VIN CODE
"T"
2009-2015 DODGE DURANGO 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2009-2010 DODGE RAM 1500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2009-2010 DODGE RAM 2500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2009 DODGE RAM 3500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2009-2010 JEEP COMMANDER 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2009-2015 JEEP GRAND CHEROKEE 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2011-2016 RAM 1500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2012-2016 RAM 2500 5.7L 345CID V8 BI-FUEL OHV, (16 VALVE) VIN CODE "T"
2011-2016 RAM 2500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
2011-2016 RAM 3500 5.7L 345CID V8 OHV, (16 VALVE) VIN CODE "T"
This item includes:
Multiple Layers Steel (MLS) Head Gasket
Valve Cover Gasket
Valve Stem Seals
Intake Manifold Gasket
Exhaust Manifold Gasket
Front Camshaft Seal
O-rings
Other Small Gaskets
RTV Silicone
30 Cylinder Head Bolts (20 Long Bolts, 10 Short Bolts)
8 Intake Valves (3 Groove; Head 52.10mm x Stem 7.90mm x Length 130.60mm)
8 Exhaust Valves (3 Groove; Head 39.40mm x Stem 7.90mm x Length 130.10mm)