Full Gasket Set Bearings Rings Fit 99-08 Chevrolet Toyota Celica Corolla 1ZZFE. The piston rings are located inside of a car’s engine. The piston ring’s main purpose is to assist in sealing the combustion chamber, manage the oil consumption of the engine, and to assist in transferring heat to the engine from the piston. The crankshaft, connecting rods and bearings are extremely important in every engine build, because they convert the reciprocating motion of the pistons into rotational torque. The longer the stroke, the greater the leverage effect and the greater the torque output of the engine. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head. The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder head. Time will come that your engine gaskets, bearings, and piston rings will wear out. Always remember, when your engine gaskets, bearings or piston rings fail, a replacement bearings should immediately be installed. Be sure to have your engine parts replace with our aftermarket parts as soon as they start to give you trouble.
Fits Following Models:
1998-2002 CHEVROLET PRIZM 1.8L 110CID L4 DOHC, (16 VALVE), ENG CODE "1ZZFE"
2000-2005 TOYOTA CELICA GT 1.8L 1794CC L4 DOHC, (16 VALVE), ENG CODE "1ZZFE"
1998-2008 TOYOTA COROLLA 1.8L 1794CC L4 DOHC, (16 VALVE), ENG CODE "1ZZFE"
2003-2008 TOYOTA MATRIX XR 1.8L 1794CC L4 DOHC, (16 VALVE), ENG CODE "1ZZFE"
2000-2005 TOYOTA MR2 SPYDER 1.8L 1794CC L4 DOHC, (16 VALVE), ENG CODE "1ZZFE"
This item includes:
Full Gasket Set (Multiple Layers Steel (MLS) Head Gasket, Valve Cover Gasket, Valve Stem Seals, Other Small Gaskets, ..., Lower Gasket Set)
RTV Silicone
Complete NPR Piston Ring Set (Premium Steel Material Piston Rings)
Piston Rings Size available (STD - Standard Size, or oversize: 0.50mm = 0.020")
Standard Bore Diameter: 79.00mm
1st Group: 1.20mm
2nd Group: 1.20mm
Oil Ring: 3.00mm
King Main Bearing Set (STD - Standard Size, or Undersize 0.25mm = 0.010", 0.50mm = 0.020")
King Rod Bearing Set (STD - Standard Size, or Undersize 0.25mm = 0.010", 0.50mm = 0.020")
Thrust Washer