Full Gasket Set Bearings Rings Fit 93-97 Toyota Corolla Geo Prizm 1.6 DOHC 4AFE

Full Gasket Set Bearings Rings Fit 93-97 Toyota Corolla Geo Prizm 1.6 DOHC
4AFE. Provides better seal, improves performance, and decreases oil
consumption. Much improved design with more efficient, withstands extreme
heat, reduce tension with better fuel economy, reduce cylinder wear. Replace
Part : 13011-16300, 13011-16340, 94854159, 94855500

Full Gasket Set Bearings Rings Fit 93-97 Toyota Corolla Geo Prizm 1.6 DOHC
4AFE. The piston rings are located inside of a car's engine. The piston ring's
main purpose is to assist in sealing the combustion chamber, manage the oil
consumption of the engine, and to assist in transferring heat to the engine
from the piston. The crankshaft, connecting rods and bearings are extremely
important in every engine build, because they convert the reciprocating motion
of the pistons into rotational torque. The longer the stroke, the greater the
leverage effect and the greater the torque output of the engine. The head
gasket is the key component of the engine. It is compressed between the engine
block and the cylinder head. The head gasket seals in the internal combustion
process to make sure maximum compression is achieved and also keeps coolant
and oil from mixing together as the two fluids travel from the engine block to
the cylinder head. Time will come that your engine gaskets, bearings, and
piston rings will wear out. Always remember, when your engine gaskets,
bearings or piston rings fail, a replacement bearings should immediately be
installed. Be sure to have your engine parts replace with our aftermarket
parts as soon as they start to give you trouble.

Fits Following Models:
1993-1997 GEO PRIZM 1.6L 1588CC 98CID L4 DOHC, (16 VALVE), ENG CODE
"4AFE"
1993-1997 TOYOTA COROLLA 1.6L 1587CC L4 DOHC, (16 VALVE), ENG CODE "4AFE"

This item includes:

Full Gasket Set (Graphite Head Gasket, Valve Cover Gasket, Valve Stem Seals, Other Small Gaskets, ..., Lower Gasket Set)
RTV Silicone
Complete Piston Ring set (Sizes available: see option above)
Standard Bore Diameter: 81.00mm
1st Group: 1.50mm
2nd Group: 1.50mm
Oil Ring: 3.00mm
Main Bearing Set (Sizes available: see option above)
Rod Bearing Set (Sizes available: see option above)
Thrust Washer

Remark: If you want the oversize(s), please leave us a note in the "Add
Message to Seller" box that eBay provided when you go to check out. Click the
SAVE button in order for your note to be saved, and double check to make sure
your note is lodged with your payment. For other oversizes please contact us
for special order.