DCT Billet Transmission Oil Sump Pan For Nissan GTR R35 09-19 GTR R35 VR38DETT
Oil pan machined aluminum (anodized finish).
The oil drain drain and add two places, oil remaining (about 1.7L) at the time of Dual Clutch Transmission oil change is not.
Additional uses strong 5000 gauss neodymium mug drainage to drain bolt, to collect the iron powder was unmistakable in oil to extend the maintenance cycle of the Dual Clutch Transmission.
The new design baffle plate of the bolt corresponding to the entire year, also leads to ensure that oil to the strainer in all driving conditions.
This is a billet oil pan with anodized finish. The pan comes with 2 drain holes so there wont be any left overs after draining the oils. For the additional drain, we use a 5000 gauss magnetic drain bolt to collect the iron debris so the maintenance cycle will be lengthened. The baffle plates inside the pan are newly designed to feed the oil through the oil strainer constantly. The volume capacity of the oil will be same as stock one. For installation, oil pan will require to use an OEM magnet , Drain Tube, And Drain Plug.
For 09-19 Nissan R35 GTR