These are the new 3mm thick intakes and are built for up to 30lbs of boost.
*THROTTLE BODY 92mm AND FUEL RAILS ARE INCLUDED
These will fit cathedral style LS1 LS2 LS6 4.8 5.3 6.0 heads
Intake Manifold Height: 9.00 inches (approx. 3 inches higher than stock)
Material Thickness: 3 millimeters
Throttle Body Opening: 92 through 102 millimeters
Throttle Body: 92mm
Intake total length: 20 inches
3/4 high flow fuel rails: 2 included
Vacuum ports: 3
Fabrication: TIG Welded Aluminum
Fuel rails: Included
Fuel crossover line: Included
Throttle cable bracket is a Holley part 20-148 and is not included.
This intake will fit cathedral port LS1/LS2/LS6 heads
All aftermarket Intakes Including Holley, Edelbrock, etc... are going to require rerouting
of vacuum lines, and minor adjustments to fuel lines and sensors to make work on a certain applications.
***NOTE: PLEASE NOTE FACTORY VALLEY COVER MAY NEED TO BE MODIFIED TO FIT THE INTAKE MANIFOLD.
Product Disclaimer: This product is not designed to meet emissions/noise standards and is not for street or highway use. This product is not certified and may not be legal for use on emissions-controlled vehicles in any country/jurisdiction. Any other use, including recreational off-road, may violate local, state, and federal laws. Dynamic Performance Tuning does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the customer's responsibility. Dynamic Performance Tuning will not ship CARB restricted products into CARB restricted areas under any circumstances. ***OFF-ROAD USE ONLY***