Complete Non-MDS Kit for 2005-2008 Dodge Ram 2500 3500 5.7L Hemi Engines.
Allow the engine to reach its maximum RPM potential. Decrease friction and
increase longevity when directly compared to flat tappet lifter. Perfect
performance replacements for stock hydraulic roller lifters or retro-fit
hydraulic roller lifters for non-roller blocks.
Complete Non-MDS Kit for 2005-2008 Dodge Ram 2500 3500 5.7L Hemi Engines. The
hydraulic lifter in a car's engine uses oil pressure to adjust a plunger and
take up all the clearance in the valve train. This helps to ensure less engine
noise and longer reliability, due to less wear and tear. Hydraulic lifters can
begin to fail through normal use of a vehicle. After several years of running
the engine of your vehicle, the hydraulic lifters within the valves can become
laden with sludge, and other contaminants in the valve, that they start to
wear out. New hydraulic lifters can make a tremendous difference in the way
that a vehicle runs as well as how the engine sounds. The head gasket is the
key component of the engine. It is compressed between the engine block and the
cylinder head. The head gasket seals in the internal combustion process to
make sure maximum compression is achieved and also keeps coolant and oil from
mixing together as the two fluids travel from the engine block to the cylinder
head. Therefore the cylinder head gasket, and lifters are an important part of
your engine. They should always be in perfect condition and should be
maintained properly. So, if you notice that this part is showing signs of
excessive wear, have them replaced immediately. Be sure to have your worn out
parts replace with our aftermarket replacement parts set as soon as they start
to give you trouble.
Fits Following Models:
2005 DODGE RAM 2500 5.7L 345CID V8 OHV, (16 VALVE), VIN CODE "D"
2006-2008 DODGE RAM 2500 5.7L 345CID V8 OHV, (16 VALVE), VIN CODE "D, 2"
2005 DODGE RAM 3500 5.7L 345CID V8 OHV, (16 VALVE), VIN CODE "D"
2006-2008 DODGE RAM 3500 5.7L 345CID V8 OHV, (16 VALVE), VIN CODE "D, 2"
This item includes:
Multiple Layers Steel (MLS) Head Gasket
Valve Cover Gasket
Valve Stem Seals
Intake Manifold Gasket
Exhaust Manifold Gasket
Front Camshaft Seal
O-rings
Other Small Gaskets
Front Timing Cover Gasket
RTV Silicone
30 Cylinder Head Bolts (20 Long Bolts, 10 Short Bolts)
16 NON-MDS Hydraulic Roller Lifters
4 NON-MDS Yoke Assembly w/ Bolts
Mopar Genuine Non-MDS Expansion Plug (Solenoid Block Off Plugs)
Non-MDS Camshaft
1 Timing Chain Kit
1 Oil Pump