Notes:
1.Please check whether it is fit your vehicle before purchase.
2.This item is compatible with universal vehicles: Car, SUV, ATV, VAN, Pickup
Truck, Bus, Wagon, Motorcycle etc. (Please confirm plug type of your
vehicle,Thank you! )
Compatibility: 9005+H11(High Beam + Low Beam)
Specifications:
Socket: 9005/HB3 + H11/H9/H8
Wattage: 80W/Pair 40W/Bulb
Lumens: 8000LM/Pair 4000LM/Bulb
LED Chip: 3570 CSP LED Chip
Type: Plug And Play
Color Temperature: 6000K-6500K Super White
Voltage: DC 12V-24V
Current: 950±30mA
Waterproof Level: IP68
Material: Ceramic + Aviation Aluminum
Lifespan: ≥50,000 Hours
Usage: Headlight
Note:For a few newest years make cars(About 0.1%) And DRL Model may need add
Load Resistors(Not including) to stop flickering Issue or fix error message )
Package Included :
2x 9005/HB3 LED Light Bulbs
2x H11/H9/H8 LED Light Bulbs
5 Years Warranty
Well Packaged in Retail Box
LED headlight advantages:
1\. LED lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the LED lights are illuminated
without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more
than 30%.
2\. Fast cooling , using the most advanced, heat-dissipating structural
design.
Low warranty:
The power driver adopts a wide voltage constant current mode which has a
simple structure, so that the automobile can flexibly cope with various
voltage unstable conditions, and has achieved the purpose of less component
damage. Compared to HID ballast maintenance, The repair probability is very
low which is less than 80%.
3\. Low heating temperature, The working temperature of helium can reach
800°-1000°
4\. LED headlight has a simple structure, and the parts are less than the
xenon lamp, which is lower than the xenon lamp failure rate!
5\. Car LED headlight color temperature are balancing. Xenon bulbs are clear
in the same color, about 6000K.
Install Caution
1\. As a safety precaution, make sure that the car has had time to cool down
properly before starting the installation process.
2\. Put the vehicle into park or make sure it is securely in gear.
3\. Be sure to turn off the ignition and remove the key.
4\. Be careful to avoid burns, especially when turning on or off the vehicles
lighting.
5\. Be careful to avoid crushing or cutting the bulbs. Also make sure to not
touch the bulbs with your fingers, as this will cause blotting.
6\. Fully examine the connection of the contact points, ports and the wires as
faulty connections can cause lighting problems.
7\. Make certain that the end of the bulb does not come in contact with the
interior light shield of the headlight when adjusting the bulb.