Note:
Professional installation is highly recommended
Modification on headlight back cover for clearance may needed on some cases
This is a combo set of 9005+H11, Please make sure bulb type is what you need
BEFORE purchase
Specification:
Plug Type: 9005+H11, High & Low beam
Input Power: 120W/set (60W/bulb)
LED Quantity(each bulb): 2pcs CSP / COB chip
Luminous Flux: 26000LM/set (13000LM/bulb)
Operating Voltage: DC 9-32V (fit 12V, 24V vehicles)
Color Temperature: Pure White 6000K
IP65 rated water and dust seal, 360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40~+80°C
Lifespan: >30000hrs
Usage: headlight
Features:
▲300% brighter than stock halogen, designed to enhance your visibility and
driving safety at night and bad weather.
▲Latest 2-side COB LED light source, 360 degree beam angle ,super bright
without blind zone.
▲Smart cooling system with 12,000RPM turbo cool fan provide super cooling
ability, which ensures a longer lifespan up to 5,0000 hours.
▲Upgrade driver, built-in constant current CPU,instant full brightness without
start-up relay
▲IP68 waterproof rate provided your safety driving especially in extreme
weather like rain/snow/fog
▲Low Power Consumption than Halogen bulb, Energy Saving
▲Low Voltage Protection, High Precision Constant Current driver Chip
▲10 Minutes Quick Installation. No tools needed to replace the lower profile
LED bulb. Ridroid LED bulbs are perfectly fit your vehicle even factory
housing has a dust cover or there is limited space on the passenger side, only
need 10 minutes.
Package Included:
2x 9005 LED headlight bulb
2x H11 LED headlight bulb
1x Installation manual
5 Years Warranty
Well Packaged in Retail Box
LED headlight advantages:
1\. LED lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the LED lights are illuminated
without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more
than 30%.
2\. Fast cooling , using the most advanced, heat-dissipating structural
design.
Low warranty:
The power driver adopts a wide voltage constant current mode which has a
simple structure, so that the automobile can flexibly cope with various
voltage unstable conditions, and has achieved the purpose of less component
damage. Compared to HID ballast maintenance, The repair probability is very
low which is less than 80%.
3\. Low heating temperature, The working temperature of helium can reach
800°-1000°
4\. LED headlight has a simple structure, and the parts are less than the
xenon lamp, which is lower than the xenon lamp failure rate!
5\. Car LED headlight color temperature are balancing. Xenon bulbs are clear
in the same color, about 6000K.
Install Caution
1\. As a safety precaution, make sure that the car has had time to cool down
properly before starting the installation process.
2\. Put the vehicle into park or make sure it is securely in gear.
3\. Be sure to turn off the ignition and remove the key.
4\. Be careful to avoid burns, especially when turning on or off the vehicles
lighting.
5\. Be careful to avoid crushing or cutting the bulbs. Also make sure to not
touch the bulbs with your fingers, as this will cause blotting.
6\. Fully examine the connection of the contact points, ports and the wires as
faulty connections can cause lighting problems.
7\. Make certain that the end of the bulb does not come in contact with the
interior light shield of the headlight when adjusting the bulb.