In some automobiles made prior to the 1980s, the blend door may have been actuated by a metal cable that was connected directly to the temperature control lever on the dashboard. A sure way to move the blend door, some systems took more than a little effort to operate. As autos had more and more labor-saving devices added as standard equipment, heater and air conditioning controls could be operated with less effort when automakers started installing blend door actuators. An actuator moves the blend door automatically when the temperature control is moved. An actuator can be powered by vacuum or by a small motor mounted within the heat and air assembly.
Feature
Direct Replacement!!
100% Brand New And High Quality
High Performance With Fast Shipping
Product Specifics
Manufacturer Part Number: E82687301CP
Manufacturer Warranty: 3 Years
UPC: Does not apply
Color: Black
Fitment Type: Direct Replacement
Interchange Part Number: 15-72971+52402598+52402612+89018365-5+Air Inlet+Temperature
OE/OEM Part Number: 604-106+16163982+52402588+52402598
Shipped Country: US
Modified Item: No
Non-Domestic Product: No
Applicable Regions: Temperature,Air Inlet,Main
Product Type: Auxiliary Heater
Finish: Plastic
Custom Bundle: Yes
Bundle Description: 2x Air Door Actuator
To Fit: GENERAL MOTORS 1994-2014
Material: Plastic+Metal
Packaging Type: Box
Return Policy: 30 Days Free Return
Terminal Gender: Male
Terminal Type: 5 Pin
Activation Type: Electrical
Switch Activation Type: Toggle
Non-Domestic Product: No
Superseded Part Number: 15-72971+52402598+52402612+89018365-5
Vintage Car Part: No
Performance Part: No
Universal Fitment: No
Function: Air Inlet/Temperature
Other Part Number: 15-72971, 16163982, 52402588, 52402598, 52402612, 89018365
Installation
1. Position the recirculation door actuator (3) to the passenger side of the HVAC housing (4) and connect the wire harness connector (1) to the actuator.2. Install the recirculation door actuator onto the HVAC housing. If necessary, rotate the actuator slightly to align the spline on the actuator with therecirculation-air door.3. Install the two screws (2) that secure the recirculation door actuator to the HVAC housing. Tighten the screws to 2 Nm (17 in. lbs.).
4. Install the blower motor .
5. Install the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -Installation.6. Reconnect the negative battery cable.
6. Reconnect the negative battery cable.
7. Initiate the Actuator Calibration function using a scan tool.
(1)Position the rear recirculation door actuator
(2) to the left side of the rear evaporator housing
(3) on top of the vehicle and connect the wire harnessconnector
(4) to the actuator
Customer Reviews
Be the first to post review