This item is compatible with universal vehicles: Car, SUV, ATV, VAN, Pickup
Truck, Bus, Wagon, Motorcycle etc. (Please confirm plug type of your
vehicle,Thank you! )
Notices:
Please check whether it is fit your vehicle before purchase. If you are unsure
your bulb type, please do remember send message to tell us your car make,
model, year and other information which is helpful to check bulb type. for
example:
2004 Ford F-150, high/low beam
2015 RAM 1500 with projector-type, high beam
Compatible With: 9012+5202
Specifications
1\. Condition: 100% Brand New / Never Used
2\. Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
3\. IP Rate: IP68
4\. LED type: COB LEDs
5\. Beam Angle: 360°
6\. Color Temperature: 6000K-6500K White
7\. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
8\. Operating Life: >50,000hrs
9\. Operating Temperature: -40 - +80°C
10\. Application: Low Beam Headlights + Foglights
11\. Number of Bulbs: 4
12\. To Fit: Low Head Lights Kit & Fog Light Kit
13\. Placement on Vehicle: Left,Right,Front
14\. For a few newest years make cars(About 0.1%) ,Germany Cars,Dodge
,Jeep,Toyota,Nissan,Ford,Chevy Cars and DRL Model may need add Load
Resistors(Not including) to stop flickering Issue or fix error message )
Description
(2pcs/set) 9012+5202 LED headlight + Fog Light conversion kit
Upgrade X8 series 4sides LED headlights, smaller size , applicabel to more car
models.
Latest COB chip light source,4 luminous faces no blind zone
Engineering beam pattern design throw more light on road evenly at appropriate
angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road
situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction high speed mute fan system keep the light bulb in
appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat
radiating
2.High speed mute fan(12000R/Min),high Air flow for faster cooling rate
Package Included
2x 9012 High Power LED HeadLights Bulbs
2x 5202 LED Fog Light Bulbs
(Ridroid brand packaging boxes and neutral packaging boxes are randomly
delivered )
Automotive LED headlampsadvantages
1\. LED lights than traditional halogen energy, more power.
2\. Xenon lamp brightness and proximity , but the LED lights light up without
delay, to enhance road safety. Instant start no strong currents impact ,
effectively protecting the car comes with a battery , improving battery life
of more than 30%.
3\. Fast cooling , the appearance of the most advanced design , thermal
structure ingenious and reasonable.Less warranty, power driver with wide
voltage constant current mode , the car can respond to a variety of voltage
instability , the effective protection of normal use Led efficient and simple
structure . Fewer Components damaged, repair the probability is very low ,
compared with HID ballast repair lower than 80% .
4\. Heating temperature is low , protect the car . Xenon working temperature
up to 800 ° -1000 ° , the main reason for the car ignition .
5\. LED car headlights simple structure, fewer parts than xenon lamps,
significantly lower than the xenon lamp failure rates !
6\. Automotive LED headlamps color temperature balancing. The Xenon bulbs in
the same color to clear , about 6000K.
Install Caution
1\. As a safety precaution, make sure that the car has had time to cool down
properly before starting the installation process.
2\. Put the vehicle into park or make sure it is securely in gear.
3\. Make sure to have the ignition turned off and the keys removed.
4\. Be careful to avoid burns, especially when turning on or off the vehicles
lighting.
5\. Be careful to avoid crushing or cutting the bulbs. Also make sure to not
touch the bulbs with your fingers, as this will cause blotting.
6\. Fully examine the connection of the contact points, ports and the wires as
faulty connections can cause lighting problems.
7\. Make certain that the end of the bulb does not come in contact with the
interior light shield of the headlight when adjusting the bulb.