Application:
Compatible for Infiniti:
Compatible for Infiniti JX35 2013
Compatible for InfinitiQ50 2016-2017
Compatible for Infiniti Q60 2017
Compatible for Infiniti QX60 2014-2017
Compatible for Nissan:
Compatible for Nissan Altima 2013-2017
Compatible for Nissan Maxima 2016-2017
Compatible for Nissan Murano 2015-2017
Compatible for Nissan Pathfinder 2013-2017
Specification：
Color： Black
Warranty： one year
Condition: New
Package Include: 4 x Tire Pressure Sensors
Frequency: 315 MHz
Reference Part Number :
40700-3JA0A, 40700-3JA0B
Feature：
New 4 Pcs Tire Pressure Sensor.
Made of high quality material, ensuring high durability for long time use.
Professional manufacturing, high accuracy and reliability.
High level of accuracy and sensitivity, enhance safety of your vehicle.
Fit both the front wheels and the rear wheels, left and right sides.
Please calibrate your Sensor after install
Notice:
Tire pressure sensors maybe require programming or "re-learning" before they will become activated or recognized by the vehicle upon installation. Please check your owner's manual for details on this process specific to your vehicle.
The sensors were not coming with any nuts or bolts.
Please confirm your original part number or oem numbr can matche up with one of the part numbers above
Professional installation is highly recommended (No Instruction Included)
Installation Process：
1\. Loosen the tire: Remove the valve cap and core and deflate the tire.
2\. Dismount the tire: Clamp the tire onto the tire changer, and adjust the
valve at 1 o’clock relative to the tire separation head. Insert the tire tool
and lift the tire bead onto the mounting head to discount the head.
3\. Dismount the sensor: With a screwdriver remove the fastening screw and
sensor from the Valve stem, then loosen the nut and remove the valve.
4\. Mount sensor and valve: Slide the valve stem through the valve hole of the
rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin.
Assemble the sensor body against the rim and tighten the screw.
5\. Mount the tire: Place the tire on the rim, making sure that the valve
faces the separation head at an angle of 180 degrees. Mount the tire over the
rim.